Pet memorials · Made in NZ
A keepsake to remember them by
When you lose a pet, the photos can feel like all that's left. We turn a favourite one into a 3D-printed figurine of them, something solid you can hold and keep. Made with care in New Zealand, and you only go ahead once the model feels right.
- From $12
- See the model first
- Made in Tauranga
House, from one photoHow it works
Turn a favourite photo into a lasting memorial
Upload one photo of your pet and we'll make a 3D model of them. Turn it around, choose a colour and size, and see the exact price for the print. Nothing is printed until you approve it. The clip uses a picture of a car; your pet's photo goes through the same steps.
What arrives
What the finished piece is like
Here's exactly what to expect, so nothing about it is a surprise.
- One solid colour of PLA plastic. It isn't painted, so it keeps their shape and pose rather than their markings.
- Fine lines from printing in layers, most visible up close. Details as fine as whiskers are too small to print.
- Want more than one colour? Up to four colour bands, stacked by height, add a surcharge.
- Supports removed and every piece checked by hand in Tauranga before it's posted.
- Made for indoors: strong sun or a hot car can soften PLA.
The pieces in our photos aren't pets, but a pet memorial is printed in exactly the same way.
Make it theirs
Add their name and a date
In the editor you can stand the figurine on a base and add up to two short lines of lettering, such as their name and the years you had together.
- A round, square or rounded-square base, with the lettering raised or pressed into the top.
- In one colour the lettering reads by light and shadow. With multi-colour (a surcharge), the base and raised lettering can each have their own colour.
- The lettering doesn't change the price. The base adds a little material, shown in your price before you pay.
Prices in NZD
Sizes and prices
Medium, about the height of a mug, is our most popular size. A small piece sits in your palm, while large and XL make more of a centrepiece. Within each size, a chunkier shape costs a little more than a slender one.
Small
up to ~6 cm
$12–26
Palm-sized - keyrings, tokens, small figures.
- Most popular
Medium
up to ~11 cm
$26–46
Mug-sized - most keepsakes and models.
Large
up to ~17 cm
$46–74
Bottle-sized - statement pieces and busts.
XL
up to ~25 cm
From $74
Our biggest - near the print-bed limit.
Before you upload
Choosing the right photo
Works best
- Their whole body in the frame, nothing cut off
- Side-on or front-on, in soft daylight
- The original from your camera roll, sharp and in focus
- Just them, against a fairly plain background
Avoid
- Another pet or a person overlapping them
- Low contrast, like a black dog on a dark couch
- Heavy shadows, or a bright window behind them
- Screenshots, heavy filters or small, blurry copies
Only have a few photos? That's okay. Message us before you start and we'll help you choose the one most likely to work.
Tauranga, New Zealand
Handled gently, made locally
We treat memorial orders with care. Every piece is printed on our own printers in Tauranga, so it's handled close to home rather than shipped slowly from overseas.
Your photo stays private. Uploading sends us a copy, used only for an automated safety check and to make your model, and you can ask us to delete it. The details are in our privacy policy.
Making one while they're still with you? Our pet figurines page has tips for a good likeness. Remembering something else too? A family home, a first car or a favourite character can be printed from a photo the same way.
Before you start
Questions families often ask
Can you make a memorial figurine from a photo of my pet?
Yes. Upload a favourite photo of your pet and we'll create a 3D-printed figurine of them, so you have something lasting to hold. We handle these orders with care, and you approve the model before it's printed.
What if I'm not sure which photo to use?
There's no rush. You'll see the 3D model before anything is printed, and if it isn't right you can try another photo (each new model uses credits). Or talk to us first: we're happy to help you choose.
What is the keepsake made from?
It's 3D printed in PLA, a solid, lasting plastic, in one colour of your choice: Warm White, Sunflower Yellow, Sky Blue, Forest Green, Crimson Red, Walnut Brown, Navy Blue or Matte Black. It isn't painted, so it keeps their shape rather than their markings, and colour bands are available for a surcharge.
How much does a pet memorial keepsake cost?
From $12 NZD for a small piece, $26–46 for the popular size, $46–74 for a larger memorial and from $74 for our biggest. Shipping is added at checkout and depends on where it's going. Multi-colour prints add a surcharge - your exact price is always shown before you pay. Making each 3D model uses generation credits - signing up covers your first 4 models free, then credit packs start at $12. The size price is for the print itself, and nothing is printed until you approve the model.
Do I have to pay before I see it?
No, not for the print. You see the 3D model and its exact price first, and only order when it feels right. Making the model uses generation credits, and signing up covers your first 4 models free.
Is my photo kept private?
Your photo is used for exactly two things: an automated safety check and creating your 3D model - we don't train any AI on it, and we don't let our providers train on it either. We never sell your photos or share them publicly without your permission. Full details are in our privacy policy.
Will it look like my pet?
It's made from a single photo, so it captures their shape and pose but not every detail, and it isn't painted. You can turn the 3D model around and check it before you decide. If it doesn't feel like them, try another photo (each new model uses credits) or message us first.
Can I add their name or a date?
Yes. In the editor you can stand the figurine on a base with up to two short lines, such as their name and the years you had together (up to 22 characters a line). The lettering doesn't change the price; the base adds a little material, shown before you pay. Macrons and accents print as plain letters, so ō becomes o.
How long does it take?
Everything is made to order in Tauranga: we print your piece after you approve it, then courier it to you within New Zealand, so there's no overseas wait or customs. If you need it by a particular date, message us first and we'll tell you honestly what's possible.
Can I send one as a gift to someone who has lost a pet?
Yes. Make the model from a photo of their pet, perhaps one a family member can share, then enter their address at checkout and we'll post it straight to them anywhere in New Zealand.
Can it go outside, in the garden or by their grave?
We'd suggest keeping it indoors. PLA can soften in strong sun or heat, so a shelf or bedside table suits it best. If you'd like something for outdoors, message us first and we'll tell you honestly what's possible.
Can it hold ashes?
No. It's a printed figurine rather than an urn, so it isn't made to hold ashes. It can sit beside an urn or a favourite photo instead.
When you're ready
Start with a favourite photo. You'll see their 3D model and the exact price for the print before you decide anything.
Start with a favourite photoPrints from $12 · Made in Tauranga · Posted NZ-wide
What people make